Ingalls 35420 Front Fastcam 14mm Camber Kit ±1° For Drops Up to 1.5"

Perfect for lowered vehicles!  Replace both strut to spindle mounting bolts to achieve up to ±1° Camber Adjustability.  FRONT ONLY. For 0" - 1.5" Drop.

Note:  For positive camber adjustment, rotate the upper FastcamTM arrow towards the tire and the lower FastcamTM arrow towards the engine.  For negative camber adjustment, rotate the upper FastcamTM arrow towards the engine and the lower FastcamTM arrow towards the tire.

CAUTION:  Observe proper safety and repair procedures for installation of all chassis parts.  Some chassis parts require specialized tools and experience and therefore MUST be installed by a qualified technician otherwise an unsafe vehicle and / or personal injury could result.

NOTE:  These parts are intended for use in vehicles with abnormal alignment and are designed to replace the non-adjustable factory equipment.  These parts are not designed for installation on vehicles with suspension and/or steering systems modified for racing, competition or any other non-standard purpose.

Sold as "Each".  For complete front pair, order 2 of this item. 

BE SURE YOU Measure your Strut Bolts BEFORE ORDERING - Your vehicle may have come from the factory with 12mm or 14mm strut bolts!!!